China Cheap Nickel Alloy Bars Manufacturers Factory - Buy Nickel Alloy Bars for Sale

Home / Products / Rod and Bar / Nickel Alloy Bar / Rod

Your Professional Nickel Alloy Bars Manufacturer!

Lork Group specializes in supplying nickel alloy rods and bars. Common materials include hastelloy, monel, inonel, incoloy, haynes, and nimonic, etc. Our stock complies with ASTM, AISI, AMS, JIS, GB, and other relevant standards. These rods are commonly used in aerospace, medical, and industrial applications. We stock rod sizes ranging from Ø4 mm to Ø600 mm and offer custom processing from billets into square rods, round bars, and related castings. Best of all, we support third-party testing!

Nimonic 105 Nickel Alloy Bar
Nimonic 105 is a nickel-cobalt-chromium-based precipitation-hardening wrought superalloy, renowned for its exceptional strength, creep resistance, and oxidation resistance at high temperatures. It
Incoloy 801 Nickel Alloy Bar （UNS N08801, ASTM B408）
Incoloy 801 is a nickel-iron-chromium alloy commonly used in petrochemical, aerospace, furnace equipment, and heat treatment baskets, and is highly favored for its excellent high-temperature
ASTM B166 Haynes 617 Nickel Alloy
Haynes 617 is an excellent nickel-chromium-cobalt-molybdenum-aluminum-titanium system solid solution strengthened high-temperature alloy, known for its excellent high-temperature strength, oxidation
Inconel 713C Nickel Alloy Bar
Inconel 713C is a nickel-chromium-based cast high-temperature alloy that is precipitation-strengthened by the γ' phase. It has good strength, creep resistance, thermal fatigue resistance, and
ASTM B160 Nickel 200 Alloy
Nickel 200 is a commercially pure nickel, and ASTM B160 is the bar standard for Nickel 200 Alloy. ASTM B160 Nickel 200 Alloy is known for its excellent corrosion resistance (especially in reducing
ASTM B160 Nickel 201 Nickel Alloy
Nickel 201 is commercially pure nickel (nickel content ≥99.0%). ASTM B160 nickel 201 nickel alloy is a low-carbon version of Nickel 200. By reducing the carbon content, it prevents intergranular
Inconel 738LC Nickel Alloy Bar
Inconel 738LC is a nickel-based precipitation-hardening superalloy with a typical material density of 7.81 g/cm³. ‘LC’ refers to low carbon, a property that gives it excellent resistance to oxidation
AMS 5829 Nimonic 90 Nickel Alloy
Nimonic 90 is a precipitation-hardening nickel-chromium-cobalt alloy favored for its exceptional creep resistance and stress-rupture strength at temperatures up to 920°C. AMS 5829 Nimonic 90 Nickel
Udimet 720 Nickel Alloy
Lork Group offers Udimet 720 nickel alloy, which is available for third-party testing and custom fabrication in a variety of specifications. Inquire online!
AMS 5662 Inconel 718
Lork Group is a long-term stockist of AMS 5662 Inconel 718 nickel alloy. We offer a variety of specifications, support custom processing, and offer competitive prices. Inquire now!
Haynes 282 Nickel Bar （UNS N07208，ASTM B572）
Haynes 282 alloy is the highest scorer in the impossible triangle of high-temperature strength, weldability, and long-term stability. Its design philosophy is reliable durability.
Inconel 718 ams 5663
Lork Group offers a wide variety of Inconel 718 AMS 5663 nickel alloy bar materials. Custom CNC machining is available, and third-party testing is supported. Get a quote online now!

First 12 3 4 5 6 7 Last

Custom Nickel Alloy Bars

We provide custom nickel alloy bar manufacturing solutions to meet your project needs. Customizable Options:

1. Material Type:

We provide different types of nickel alloys to choose from.

2. Size:

In-stock sizes: Diameters from Ø4mm to Ø600mm, custom sizes available upon request.

3. Shape:

Square and round bars can be customized upon request.

4. Surface Treatment:

We offer a variety of surface finishes, including polishing, brushing, lathing, and grinding.

Our Best-Selling Nickel Alloy Bars

Haynes 556 Bar

Haynes 556 is a nickel-chromium-cobalt-based solid solution-strengthened alloy. Common bar standards for Haynes 556 alloy are ASTM B572 and AMS 5878 (for aerospace applications).

Inconel 625 Bar

Inconel 625 bars are an exceptional nickel-chromium alloy known for its superior corrosion resistance, high strength, and durable performance in demanding industries like aerospace, chemical processing, oil & gas.

Hastelloy X Bar

Hastelloy X is a nickel-based alloy strengthened by nickel-chromium solid solution. Common standards for Hastelloy X bar are ASTM B572, AMS 5778 (aerospace bar standard), and AMS 5754 (forgings).

Nimonic 90 Bar

Nimonic 90 is an age-hardenable nickel-chromium-cobalt superalloy that maintains excellent creep and rupture strength up to approximately 920°C, and has good resistance to oxidation and corrosion.

Nickel Alloy Bars Specification

Dimensions	EN, DIN, JIS, ASTM, BS, ASME, AISI
Wire	Thickness starting from 0.05mm
Round Bar Size	Diameter: 3-~800mm
Hex Bar Size	2-100mm A/F
Flat Bar Size	Thickness: 2 -100mm / Width: 10 to 500mm
Square Bar Size	4 to 100mm
Rectangular Bars Size	33 x 30mm to 295 x 1066mm
Hollow Bar	32mm OD x 16mm ID to 250mm OD x 200mm ID
Tolerance	H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients' requirements
Finish	Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish

Nickel Alloy Bars Chemical Composition

Element	Min %	Max %
C	–	0.025
P	–	0.015
Si	–	0.15
Ni	33.00	37.00
Co	bal
Mn	–	0.15
S	–	0.01
Cr	19.00	21.00
Mo	9.00	10.50
Ti	–	1.00
Fe	–	1.00

Nickel Alloy Bars Mechanical Composition

Item	Metric	English
Density	8.9 g/cm³	0.32 lbs/in³
Modulus Of Elasticity	232 GPa	33.7 Mpsi
Electrical Resistivity	101.0 µohm*m	39.6 µohm*in
Thermal Conductivity	10.4 W/m*°K	72 BTUin/hrft²*°F
Coefficient Of Thermal Expansion	12.1 µm/(m*°C)	6.7 µin/(in*°F)
Melting Point	1330°C	2425°F

Nickel Alloy Bars Thermal Properties

Properties	Metric	Imperial
Thermal expansion coefficient	13.0 µm/m°C	7.2 µin/in°F
Thermal conductivity	9.1 W/mK	63 BTU in/hr.ft².°F

Nickel Alloy Bars Spot Goods


Inconel	Hastelloy	Monel	Incoloy
Inconel 625 Inconel 718 Inconel 600 Inconel X750 Inconel 601 Inconel 617 Inconel 690 Inconel 738LC Inconel 713C Inconel 602CA Inconel 725 Inconel 686 Inconel 751	Hastelloy C276 Hastelloy C22 Hastelloy X Hastelloy C4 Hastelloy B2 Hastelloy G30 Hastelloy C2000 Hastelloy B3 Hastelloy G Hastelloy N Hastelloy S Hastelloy W Hastelloy G3	Monel 400 Monel k500 Monel r405 Monel 404 Monel 401 Monel 450	Incoloy 800 Incoloy 825 Incoloy 925 Incoloy 800ht Incoloy 909 Incoloy 901 Incoloy 840 Incoloy 20 Incoloy 28 Incoloy 330 Incoloy 907 Incoloy 945 Incoloy 903 Incoloy A286
Haynes Alloy	Nimonic Alloy	Other Alloy
Haynes 230 Haynes 282 Haynes 188 Haynes 214 Haynes 556 Haynes 242 Haynes 25 Haynes 233 Haynes 244 Haynes 263	Nimonic 90 Nimonic 80a Nimonic 75 Nimonic 115 Nimonic 901 Nimonic 105 Nimonic 263	Alloy 42 Alloy 45 Invar 42 Invar 36 Kovar Maraging 250 Maraging 300 Maraging 350 MP159 Rene 41 Waspaloy MP35N

Quality Inspection Procedures

Spectrometer

Ultrasonic Testing

Stress Corrosion Testing

Microcopy

Mechanical

Eddy Current Test

Heat Treatment Furnace

Corrosion Test

Hydraulic Test

Metallographic Test

FAQ

Q: What are the common grades of nickel alloy bars?

A: Our most popular nickel alloy bar grades are Inconel, Monel, Hastalloy, Incoloy, Nichrome V, Alloy 20, and Nickel 200.

Q: What are the advantages of nickel alloy bars in high-temperature environments?

A: Heat Resistance: Nickel alloys can withstand high temperatures without losing their mechanical properties, making them suitable for use in aerospace, power generation,a nd high-temperature processing industries.

Q: Can nickel alloy bars be used in corrosive media?

A: Its high molybdenum content makes it exceptionally resistant to pitting and crevice corrosion, and it is one of only a few materials that can withstand the corrosive effects of wet chlorine gas, hypochlorite, and chlorine dioxide.

Q: Are there different surface finishes available for nickel alloy bars?

A: Depending on the size and requirements, a nickel alloy bar can be cold drawn from nickel alloy billet or nickel alloy round bar, or it can be cut from nickel alloy plate or nickel alloy strip. In surface treatment, we can provide a pickling finish, sandblasted finish, and polished finish for your choice.

Q: Where can I use a nickel alloy bar?

A: Nickel alloy bars are useful in various industries, including aerospace and automotive.

Q: What are the ingredients of nickel alloy rods?

A: Different types of nickel alloys have different compositions. However, one common thing to all of them is that nickel forms the base of the alloy. Other metals may be added to the nickel to form specific alloys depending on the application. For example, nickel-chromium alloys are suitable for high-temperature environments and are composed of nickel, chromium, and iron elements. On the other hand, nickel-copper alloys are ideal for use in marine environments and contain nickel, copper, and iron. Other popular additions to nickel include molybdenum and tungsten.

Q: What are the characteristics of nickel alloy rods?

A: Nickel alloy bars possess some unique physical and mechanical properties. Firstly, they have excellent corrosion resistance, which means they can withstand chemical reactions and are not easily damaged. Secondly, nickel alloys have high temperature and pressure endurance, which is necessary for applications that require a material to function effectively in extreme environments. Also, nickel alloys are highly resistant to abrasion, making them ideal for use in applications involving wear and tear, such as machinery and equipment.

We're well-known as one of the leading nickel alloy bars manufacturers in China. Please feel free to buy cheap nickel alloy bars for sale here and get pricelist from our factory. For price consultation, contact us.

Send Inquiry