Hasyelloy X Nickel Alloy
Welcome to Lork Group, your Hasyelloy Alloy manufacturer and exporter.
Hastelloy X alloy is commonly used in components of the combustion zone in gas turbine engines.
Due to its resistance to oxidizing, reducing, and neutral atmospheres, Hastelloy X nickel alloy is also recommended for industrial furnace applications.
Furnace rollers made from this alloy have maintained good performance after 8,700 hours of operation at temperatures of 2150°F (1177°C). It is also recommended for use in the chemical process industry, such as retorts, muffle furnaces, furnace baffles, pyrolysis process piping, and dryer components.
If you would like to consider Hastelloy X for your application, please contact the Lork Group Technical Department.
Hasyelloy X Nickel Alloy parameters
Form |
Standards And Specifications |
Image |
|
Bar and Rod |
Hasyelloy X Nickel Alloy Standard: AMS 5754 ASME SB 572 Diameter: 2mm - 600mm Length: Normally 6m, or produced as required Surface: black, bright. Peeled and polished, solution annealed. Delivery condition: cold drawn, hot rolled, forged, ground, centerless grinding Tolerance:H8, H9, H10, H11, H12, H13,K9, K10, K11, K12 or as per clients' requirements. |
|
|
Plate and Sheet |
Hasyelloy X Nickel Alloy Standard: AMS 5536 Thickness: 0.3mm - 300mm, Width: 1000mm - 3000mm Length: as required, Surface: 2B/BA/SB/8K/HL/1D/2D/No.1/pickling Delivery condition: cold rolled, hot rolled Tolerance:H8, H9, H10, H11, H12, H13,K9, K10, K11, K12 or as per clients' requirements. |
|
|
Pipe and Tube |
Hasyelloy X Nickel Alloy Standard: ASTM B775 Outside diameter: 4.0 - 1219mm, Thickness: 0.5 -100mm, Length: 24000mm Surface: 2B/BA/SB/8K/HL/1D/2D/No.1/pickling Delivery condition: cold rolled, hot rolled Tolerance:H8, H9, H10, H11, H12, H13,K9, K10, K11, K12 or as per clients' requirements. |
|
|
Coil, wire, Round Cake, Forging |
Hasyelloy X Nickel Alloy Standard: AMS 5754 Wire diameter: 0.1 to 5.0mm Surface: bright, dull Delivery condition: cold rolled, hot rolled Soft annealed: – ¼ hard, ½ hard, ¾ hard, full hard
|
|
Procurement Specifications and Industry Standards
When placing a purchase order, the description of Hasyloriy X Nickel Alloy bars must be precise to avoid ambiguity.
1. Grade and Standard (Let's start with this):
First Choice: AMS 5665. This is the most common forged/rolled bar standard in the aerospace industry, with the most stringent requirements and the highest acceptance.
General Choice: ASTM B572. Commonly used in industrial applications, equally reliable.
It must be written into the contract: "The material must meet the latest version of the AMS 5665 standard requirements."
2. Condition and Dimensions:
Heat Treatment Condition: Must be "Solution Annealed".
Dimensions: Specify "Diameter x Length". For example: Φ50mm x 3000mm.
3. Dimensional Tolerances:
Must be specified. Commonly used are "h11 grade" or tolerances according to ASTM B572 standard. For finished-machined materials, "black bar (hot rolled/forged)" or "machined bar" can be requested.
Round bar/square bar: The default is round bar, and special shapes need to be specified.
Chemical Composition
| Weight% | Hastelloy X |
| Ni | Bal |
| Cr | 20.5-23.0% |
| Mo | 8.0-10.0% |
| Co | 0.5-2.5% |
| W | 0.2-1.0% |
| Fe | 17.0-20.0% |
Mechanical Properties
| Typical room temperature | (Solution-annealed state) |
| Tensile strength | ≥ 655 MPa |
| Yield strength (Rp0.2) | ≥ 240 MPa |
| Elongation | ≥ 30% |
| Hardness | ≤ 90 HRB |
Hot Tags: Hastelloy X, Nickel Alloy, Hastelloy Alloy
You Might Also Like
Send Inquiry